12-11-2006, 01:55 AM
|
#1 (permalink)
|
|
Non Member
Offline
|
|
Join Date: Jan 2004
Location: Southern Utah
Posts: 66
|
|
toyota 22RE need help?
I had a a head gasket failure about two weeks ago. I had another head that I got the machining done on, with all new seals and valves. I had a huge lack of power before I had this problem and I couldn't get it to run smoothly. I have it all back together and it still wont run smooth, and I dont have any power increase. I did a compression test to make sure my rings were ok. They tested from 163 to 168. 170 is what they are rated when new. When I had it apart I put on a new timing chain and gears and am certain that the timing is right. I am wondering what other problems I might have. Any answers would be greatly apprecitated.
__________________
95' 2500 4x4 CC auto LB. Purchased 1/15/04 1st KDP killed. AFE intake w/Proguard 7, TAG, DSS, Rip Rook 4" ex, velvet ride shackles, Frantz bypass filter,Joe Donnely Pump,pillar guages,NV4500 conversion,ATS ex manifold,Phat Shaft Turbo,Bilstein shocks,Dana 80 rear,Optima red tops,
Last edited by CTait; 12-11-2006 at 02:02 AM..
Reason: punctuation
|
|
|
|