10-24-2009, 06:50 PM
|
#1 (permalink)
|
Offline
|
|
Join Date: Mar 2000
Location: Baltimore
Posts: 83
|
|
V-8 Intake Manifold
Am replacing the intake manifold gaskets on an older V-8 with carb. What is good to use on the gaskets to hold them on the heads so they don't slip? When I remove the old gaskets, which were original, there didn't appear to be any type of seal or glue on either side of the gaskets.
__________________
Silver '97 4 x 4, standard cab, 8' bed, 5 - speed trans.
|
|
|
|