06-08-2005, 04:02 AM
|
#1 (permalink)
|
Offline
|
|
|
|
Westach Gauge Results Question?
Got my combo gauge installed tonight, not sure it's functioning properly. I lost the instruction sheet showing which lead goes to which numbered terminal but I think I have it in right. Boost side is working fine so I know I have the 12V connection correct. Kinda concerned about the EGT side. I was only showing about 400-500F in short bursts w/my Quad box on 30hp. It never got above 500F like I thought it would. After my test, it also almost immediately cooled down to read about 200F w/out hardly any cooldown time. Could the leads for the thermocouple be reversed and giving me bogus readings? Not that keen on the innerworkings of the gauge/thermocouple so w/out the instruction sheet, it's very possible I have them backwards if that makes a difference. Any help greatly appreciated or an email scan of the instruction sheet would be just as good.
__________________
Wolfman--'04 QC SWB 4x2 SLT, Pat. Blue 305/555 6spd., LSD, Spray In, AFE II, Quadzilla Xziliraider 100hp, Bully Step Bars, Gutted Tube, SRT-10 Pillar Combo Westach boost/egt, 5" exh. (w/drone), H2 Rims w/BFG 285's, LineX'ed RDS 51 gal. Fuel/Tool Combo, Sony/JL Audio tunes, Tekonsha Prodigy!!
|
|
|
|