02-09-2006, 07:29 PM
|
#1 (permalink)
|
Offline
|
|
Join Date: Nov 1999
Location: In the country
Posts: 978
|
|
US Gear D-Celerator (E-Brake) mod question
I just scored the subject exhaust brake off ebay without the electronic parts. I cleaned it and put power on the solenoid and it works fine.
What I'd like to do is (using relays and whatever else is required) make it work with a gearsplitter type push/pull switch mounted on the shifter. From reading I've learned the pull on switch only needs to be energized for a couple of seconds then the hold on switch should come on. One poster stated max load was 30 amps, another said 60 amps?
I'm thinking that if I knew squat about electronics a trip to Radio Shack and I'd be in business. Anyone attempted this, or know how.
Thanks, RR
__________________
95 3500, 4x4, NOT STOCK
Wifes; 98 12v, 5spd 3500, NOT STOCK
1970 340, 4spd. Duster
1990 Miata with 5.0 Mustang GT drivetrain=scary FAST!!!!!!
|
|
|
|