07-25-2002, 05:29 PM
|
#1 (permalink)
|
Offline
|
|
Join Date: May 2002
Location: Cabins, WV
Posts: 125
|
|
Boost Gauge Install Problem
Installed a boost gauge on my 2002 HO today. Started the engine up and had a zero reading on the gauge. Obviously I've done something wrong. For installation I removed the 3/4" NPT plug that was just behind the fuel filter and right before a factory sending unit of some sort. Was that the right plug to remove? Could I have tightened the crush fitting too tight? I tried to make sure it was just snug not REAL tight. Any tips appreciated.
__________________
02 White 2500 SLT QC, LB, 2WD, HO, 6-speed, 3.54 LSD, Tow and Camper Pkg, PacBrake, IssPro Pyro/Boost, Westach FP, FASS, EZ, BHAF, RV275, Con O, Buckstop F&R, 4" Jardine Performance Exhaust, RDS 57 gal. combo, Line-X bed and rocker panels
|
|
|
|