12-25-2002, 12:19 AM
|
#1 (permalink)
|
Offline
|
|
Join Date: Aug 2002
Location: SEATTLE, WASHINGTON
Posts: 41
|
|
Banks Cbc Module Exhaust Brake Power Source Question
IN A PINCH TO COMPLETE BRAKE INSTALL FOR 2000 MILE TRIP STARTING 0300 HOURS ON 12/26 THROUGH 1/1/03
BANKS EXHAUST BRAKE Installation step 34 (on 1999-2002 vehicle) says to "...use red wire located in wiring harness in the engine compartment as shown in FIGURE 10..." And FIGURE 10 clearly states, ("ON RED WIRE WITH NO STRIPE") The word "NO" was emphasized .
However, there is NO SOLID RED WIRE in that bundle. All the red wires have stripes on them (either green or white). Help.  I also posted this in the "911" secxtion
Thanks, Jim
__________________
2002, 4WD, Quad, Short Bed, ETH/DEE, LSD, 3.54, SLT+, Bright White, w/ matching SNUGTOP SUPERSPORT. Agate Leather. S/S Putco 4" Nerf Bars. BANKS CBC 4" Exhaust Brake and 4" S/S Monster Exhaust. S.P.A. Gauges. And She Be, "Singing Without the Ring."
|
|
|
|