05-27-2003, 03:19 PM
|
#1 (permalink)
|
|
MC Lighting Concepts
Non Member
Offline
|
|
|
|
Statpower Prowatt 800 Inverter finally installed...
Well after a whole lot of back aches and headaches I finally have the prowatt 800 installed. Thanks everyone that gave me some ideas for location but I went with my original idea after much deliberation. I have attached a link to the photos as they are large in size. For someone thinking about doing this I used #2 marine grade wire for both ground and +12V and installed 2 terminal post under the seat where I changed over to #4 wire to go into the inverter as #2 does not fit well. I still have to do some more work under the hood as I did not like the way the crimps came out and ran out of heat shrink so there will be some rework to be done but hey it is installed and it works. I also ran power and installed a 120V duplex receptical in the bed so that I have power for all of lifes little toys.
My Trick Pics
__________________
MC Lighting Concepts  2005 3500 Quad Cab-LB Laramie 4x4, Auto, Mineral Grey/silver, RB1 Nav, Spray-On Liner, B&W Turnover Hitch, Mopar Mudflaps with LED Markers, Mopar Electric Running Boards, Jacobs E-brake, XM Direct, 911EP Galaxy Elite Lightbar, LED Tail Lights & 3rd Brake light.
Last edited by MCrossley; 05-27-2003 at 03:24 PM..
|
|
|
|