01-03-2005, 04:51 PM
|
#1 (permalink)
|
Offline
|
|
|
|
Need help with installing short throw for NV4500
I have been working on putting in my BD short throw on & off for a while now. Last time I was working on it, I got stuck having the wrong bushings cause they were from a NV4500 from a Chevy.
Going back to the beginning here, I had the round top and bought a square top from Standard so I can put in a short throw. I didn't have the carrier or anything for the square top so I called Standard back and they helped me out with the entire top assembly for the square top from a NV4500 off of a Chevy. Well the shifter arm on those have smaller diameter round ends on the shifter arm, so the bushings I took off there were to small for the BD one. I am needing the 2 square plastic bushings that fit on the round ends of the shift arm. They are square on the outside so they fit snug down inside the carrier.
BTW, I don't have my old top anymore, so I can't rob the bushings out of it.
I would appreciate it if someone could sell me some bushings if they have any extra. Standard doesn't have any.
Will try to get some pics up for reference.
JD
__________________
2006 Cummins 2500 "TRX4" pack. Patriot Blue reg. cab, 4x4 SLT, 6spd., 3" front lift, rear add-a-leaf, Smarty, AFE stage 2, no cat, MBRP muffler, quadzilla guages, Southbend OFE
|
|
|
|