11-16-2003, 07:21 AM
|
#1 (permalink)
|
Offline
|
|
Join Date: Feb 2000
Location: North Pole, Alaska
Posts: 256
|
|
FASS filter replacement idea
There was some discussion about the micron rating of the FASS system filters and in another thread they mentioned using the FS1023 filter. I’m not sure of the FS1023’s micron rating but dimensions and thread size are 1-14 UNS-2B 7.49 ins X 3.69 ins. Cat makes a 2 micron filter 1R-0749 with specs of 1-14 UNS-2B about 9.5 ins. X 3. 75 ins. that should work in place of the FS1023. The 1R-0749 crosses to a Fleetguard FF5319 with specs of 1-14 UNS-2B 9.43 ins. X 3.72 ins. but again I’m not sure of the micron rating of it either.
If someone with the FASS would check this filter out and let others know if will work it should elevate the micron rating problem some are having with this FASS system
__________________
98 F-650 w/5.9L Cummins, 330HP injectors, ATS manifold w/HX40 & Ebrake, TST #11 plate F/F, Air brakes, 22.5 tires, 26K GVW/46K CGVW
97 2500 CC/LB 4X4, 5spd, TST #10 Plate w/AFC Medium spring, 60 Gal. Aerotank, Geno's Combo Gage, Mag-Hytec Dana 80 cover, Espar Heater, 204,000 miles and climbing. Dads truck now.
|
|
|
|
Linear Mode
