01-04-2005, 03:43 AM
|
#1 (permalink)
|
|
Non Member
Offline
|
|
Join Date: Apr 2000
Location: Soquel, CA, USA
Posts: 972
|
|
Automotive MIG welding question
While removing the exhaust manifolds on my 66 Chrysler 300 I busted one of the studs
There is enough of the stud left sticking out of the block to weld a nut to the stud and remove it.
My question is about connecting the welder ground lead to a spark plug. The spark plug is very close to the stud and much cleaner that anything else to clamp to.
Will I weld the spark plug to the head if I do that?
__________________
2001 Dodge/Cummins HO 6 speed 4x4 Regular cab
Skyjacker 2.5" class 2 System, Bilstein 5100, DT Tracbar, Borgeson steering shaft, 305/70/16 ProComp AT, Velvet Ride, AFE, Onboard air, Bedslide, Lubrication Engineers oil everywhere except in the 6 speed.
R.I.P. HVAC
|
|
|
|