08-29-2008, 03:38 AM
|
#1 (permalink)
|
Offline
|
|
|
|
Removing electric water heater element.
Anybody done this before??
I need to replace the electric element in our Suburban SW10DE water heater. I looked at it tonight, but didn't have time to get too involved.
What size socket do I need for the hex-nut end of the element?
I have a 3/4 drive set that goes up to 1 1/4". Big enough? Do I need bigger? Thin wall? Deep well? I didn't have time tonight to remove the wires and try my socket.
I know they make a special tool to remove these things, but it looks pretty flimsy, and this thing is 9+ years old. I don't expect it to come out easily.
We are 85 miles from any kind of parts store or hardware store, so I want to be sure I have everything we need before I even start this project.
Thanks.....Steve
__________________
03 Silver 3500 SLT 4WD CTD HO NV5600 3.73 DRW LWB Dipricol Boost and Pre-turbo EGT, AFE, Torque Tube, Jacob's Exhaust brake, Jordan, diamond plate bed rails, diamond plate mudflaps.
|
|
|
|