08-30-2008, 09:52 PM
|
#1 (permalink)
|
|
Non Member
Offline
|
|
Join Date: Aug 2008
Location: Austin, MN
Posts: 34
|
|
Trailer brake issues... need help!
I have a 98 rinker boat with an Eagle trailer. The wheel cylinders were rusted up and shot, didnt work. I put new wheel cylinders on and the brakes do work but i have backed the adjusters as loose as they go and my brakes drag... i pull it and pop the truck in neutral at a slow roll and the trailer stops me, not really abrupt but it does stop me.. i also put a IR temp gun to the drums and they are all of 300 degrees.... these are surge brakes and only susposed to activate when the tounge of the trailer is being pushed in... what can i do to cure this prob?
__________________
1998.5 2500 4x4, 5.9 liter 24v Quad Cab S.B. SLT, Automatic (DTT Tranny!!!),HTB2 62/13 S.S. Turbo w/HX40 downpipe, Isspro Pryometer and 60 psi boost gauge, BD Low Fuel Pressure LED, Airdog 150, Quadzilla Adrenaline, Bosch 60 hp injectors, Airaid BHAF, 4" MBRP Exhaust
|
|
|
|