09-02-2008, 01:36 AM
|
#1 (permalink)
|
Offline
|
|
|
|
A PinBox safety question-
Currently I have 10 bolts holding the hitch pin to the box assembly on my 5th wheel which has a GVW of just under 14K.
I would like to lower the pin assembly down one notch for better bed clearance but doing this will leave 8 bolts, 4 on each side.
I think it would be fine but the idea of leaving 2 out because there wont be a slot for them feels odd so thought I would ask.
|
|
|
|