03-06-2009, 07:24 PM
|
#1 (permalink)
|
Offline
|
|
Join Date: Oct 2007
Location: Annapolis, IL / Queretaro, MX
Posts: 73
|
|
Travel trailer bearings
I am in the process of repacking the bearings on a 1994 Jayco, 32ft travel trailer. I am in Mexico and need to pull the trailer 600 miles to the border. I had repacked the bearings 2 trips ago, and have since failed another bearing. I am using semi synthetic grease, and will this time since it is what I have. I have heard you set the bearings on a trailer fairly loose. Anyone know?
I have been down 2x in Mexico with burned up wheel bearings (and brakes) on this trailer, and dont want to make it 3x. I engine brake when I can, and dont 'ride' the brake. I set them fairly tight the last time, which may be my mistake.
__________________
Tim
1992 W250, 4X4, ext cab, topper, 356k, all stock exc 180hp injectors
1992 D250, std cab, - retired...
2000 RAM 2500 SLT 4X4, Quad cab, Long bed, a work in progress... 
1995 RAM 3500 std cab, MT, Dual, dump bed, still refining details
|
|
|
|