12-04-2002, 09:27 PM
|
#1 (permalink)
|
|
Non Member
Offline
|
|
|
|
Open to Suggestion...Rigging truck in trailer
I'm going to be hauling a Ford in my GN hauler...
Trailers interior height is 6' 6"
Truck to top of clearance lights is 6' 5.25" thats 3/4" to spare...
I'm thinking remove the clearance lights, air down the tires, strap the axles down as normal but also put 4 straps between axles and frame and crank them down...I don't want the suspension on the Ford bouncing the truck through the roof of my trailer...
I figure doing this will give me close to 6" of clearance...any other suggestions/advice....
My brother already suggested putting foam on top of the ford and airing up the tires and just wedge the thing in there and forget the straps...so I need more orginal ideas
Thanks
-Matt
__________________
'01.5 3500 Quadcab 4WD ETH/DEE (Canadian), Mega Cannon, Jake E-Brake, 5" Exhaust, gauges, Comp, Brite-Box & more
'91 F-250 4WD 7.3 IDI 5-Speed, Hypermax Cowl Induction & more
44' GNeck Race Trailer
|
|
|
|