07-19-2003, 02:43 PM
|
#1 (permalink)
|
Offline
|
|
Join Date: Apr 2001
Location: Port Townsend, WA
Posts: 193
|
|
Blown Fuse
I have a Draw- Tite brake controller on my 98. It is wired up to the factory plug.
When I step on the brake pedal the brake indicator light on the controller does not illuminate and the brakes do not work. If I manually activate the brake lever on the controller it instantly blows the 40-amp fuse on the fuse block under the hood.
I’ve checked all the wiring and cleaned the plug, all the lights and turn signals work fine. Any ideas. Thanks, Jeff
__________________
2006 3500 SRW LWB Quad Cab. SLT Big Horn Edition.
6 speed. 4x4. Inferno Red. Jacobs Exhaust Brake South Bend Con OFE, Dynatrac Free Spin Kit, Warn Hubs, Amsoil air filter, Smarty Junior
2004 Arctic Fox 25RS Travel Trailer
|
|
|
|