06-14-2006, 12:43 AM
|
#1 (permalink)
|
Offline
|
|
|
|
Dash AC/Vent Vacuum lines hookup?
I just finished replacing the evaporator core on my 94. I've got it all back together and mounted to the firewall. When I took the 4 vacuum line off the actuators I made a diagram so I could get them hooked back up. Well I lost the diagram. I know the green line goes to the far right actuator behind the right rear of the glovebox. I'm stumped about the other three lines. There's a red,yellow and brown. The actuator on the bottom left, along the floor takes two of the lines and the actuator on the left side end takes one. Anyone know the right hookup of these three colors.
__________________
"I'd rather be Cummin then Stroking"
94 CTD 4x2 2500,#10 Plate, 191 DV,215 inj, Rear Disc Brake Conv, BD TC/VB,Torq&Press loc, PDR HX35/14cm WG, AFE Mega Cannon, MagHytecDD T Pan. KDP Blocked, 3K GSK,PrimeLoc, 2" Front Lift, Line-X Rocker Panels, Rear Airbags, Banks Exhaust. Eclipse CD8454/Alarm,Turbotimer,Auto start.
|
|
|
|