07-08-2006, 07:53 PM
|
#1 (permalink)
|
Offline
|
|
Join Date: Jul 2001
Location: Missoula MT
Posts: 29
|
|
lift pump, turbo, warranty
I have about one week left on the warranty, and the truck was a little doggy, so I took it in. I measured the lift pump pressure at 7psi at idle and 4 psi under a load. The truck showed a 0234 code, which I believe is a high boost code. I have a bully dog 2 chip and replaced the elbow, so I know why the high boost code is there. The solution by the dealer is I need a new turbo, but they would not even consider a volume test on the lift pump. I also have a bit of oil on the front of the engine, I believe related to the breather. I told them about the TSB for that issue, again they didn't know what I was talking about. My question is, how do I get them to check the lift pump? or what are the volume specs so I can do it and get them to replace it? BTW I removed the chip and replaced the elbow to stock when I brought it in, I know the turbo is not the issue. Thanks in advance for your help
__________________
2001.5 2500 QC LB 4x4 HO 6 speed 3.54 SLT Plus White Sport*Isspro turbo boost, fuel pressure, and EGT on A-pillar *Edge Comp *boost elbow*BD exhaust brake*Diamond Eye 4" exhaust*Turbo Liner*BHAF*Air Dog 100 w/light*Westin Nerf Bars*Husky Liners front and rear*Stanadyne PF*dss
|
|
|
|