09-18-2008, 06:46 PM
|
#1 (permalink)
|
|
Non Member
Offline
|
|
Join Date: Jul 2008
Posts: 14
|
|
No Bus
I have a 2000 4X4 quad cab auto and have been having trouble with a no bus issue after changing my injection pump a while back. After changing the pump none of the gauges worked and let truck sit overnught. Next day started fine and all gauges were working fine. I have since replaced my ECM as the injection pump was not the problem I was having with intermintate power loss. Driving down the road a couple of weeks ago and the gauges died and no bus was back. I have the truck at a shop and verifyed that all grounds are good and connections are clean and power is going where it should. They are unable to check the PCM or ECM. Need help.
Brad
__________________
2000 Quad 4X4,4:10, R/V 275,V/A, Goerends auto, Skyjacker 4.5" with Bilstiens dual front single rear, 37X13.50 Toyos M/T on Weld 10" Cheyenes
|
|
|
|