07-01-2002, 05:14 PM
|
#1 (permalink)
|
Offline
|
|
|
|
HELP - Big problem
I've justed started working on installing a Painless wiring harness to add some accessories. I first disconnected a High power fuse for my Amplifiers, I then went to disconnect the battery, while I was doing this the pigtail for the amplifier fuse came in contact with the brakeline. It sparked as expected but upon inspection I arc-welded through it and it started seeping brake fluid.
I'm in trouble here guys. I can't drive it and I need to order a new brake line. Luckily It's a short one and not one that goes to the brakes. There is one thing I am not comfortable working on is brakes. It's also 4th of July weekend so time is of the essence.
I posted pics. The screwdriver is pointing to the arc weld and the damaged brake line. http://www.turbodieselregister.com/u...d=1643&width=0 http://www.turbodieselregister.com/u...d=1644&width=0
Any help would be appreciated. This includes part numbers!
Thanx guys,
Kevin
__________________
2001.5 D2500 QC SB SLT 4X4, DTT 89% TC & VB, Camshaft & HRVP44 from Massdiesel, DDII injectors, Garrett BB Turbo Stage II, FASS 150 fuel system, Bully Dog 5" exhaust, 315/70R17 BFG AT's on 102 Eagle Wheels, Reunel rear and Denver Offroad front Bumpers
|
|
|
|