03-11-2004, 10:17 AM
|
#1 (permalink)
|
|
Non Member
Offline
|
|
Join Date: Jan 2000
Location: FRANKLIN, TN, USA
Posts: 504
|
|
First Gen won't Crank....... Stranded
Keeno needs some First Generation HELP!
My truck will not Crank or Start!
The Battery isn't the problem.......... It seems to be related to the Fuel Solenoid or Starter or Clutch Start Switch.
Known:
I have 12V @ both Blue Wires on the Fuel Solenoid. Terminals Clean & Secure. I have nice 'spark' from the Blue Wire to Fuel Solenoid W the Ign. Key in the run position.
Battery Up & Post Cleaned & Secure.
It Just won't CRANK....... Everything else electrical is working prefectly.
This problem has been intermittent over the past few days. I repaced all of the terminal connectors to the Fuel Solenoid. In the past if as played w/ the hot lead to the Fuel Solenoid it eventually started. I'm beginning to think it's somewhere else.
How does the Clutch "Depressed" Switch work on a First Gen?
KEENO
__________________
1992 W250 5spd. Repowered 5.9 Cummins w/ Bosch P7100 Injector Pump, HX-35 Turbo w/ 12cm2, Rebuilt Dana 70 w/3.54 gears, LSD, Quad 4X4 installed NVG4500HD Trans, SBC 13" CON-O, 3 1/2" JRE modified Banks Exhaust/Walker Muffler, Pyro/Boost, BHAF, 2" SJ frt. springs, 315/75R/16 BFG, Bushwacker Flares.
|
|
|
|