03-22-2004, 11:22 AM
|
#1 (permalink)
|
|
Non Member
Offline
|
|
|
|
Help w/ brakes
It all started the other day when I was screwin around and I was power braking slightly. I heard a loud pop and the brake pedal went to the floor. I checked all the lines over and found a worn spot on the front driver side I replaced it and bled the system of air. But after that the pedal is still soft. I dont get anything solid until about the last 1" of travel then it feels alil more solid. But it's still like trying to stop a freight train with a feather. I can't find any other leaks on the lines. Then today I had to run some errands and if I hold the pedal to the floor like at a stop light for awhile the next time I go to use the brake pedal it's harder to push but still goes almost to the floor before I get any real stopping power. So am I wrong thinking its in the master cylinder or booster since I can't find any holes in the lines?
TIA
Nathan
__________________
'94 2500 Reg. Cab SLT Laramie 250k 4x4
DTT 89% Auto (Built by Floor It Diesel), Isspro Gauges, 370s, 15.5* timing, Super B Special, #100, muffler MIA, 5" Aussie Stacks (soon to come), aFe pro guard 7, and Jordan Ultima. Dynoed: 328hp/765trq
Last edited by ndurbin; 03-22-2004 at 09:12 PM..
|
|
|
|