04-13-2004, 11:43 PM
|
#1 (permalink)
|
|
Non Member
Offline
|
|
Join Date: Oct 2000
Location: Trotwood, OH
Posts: 121
|
|
Clutch Won't Disengage
I went to push in the clutch and noticed that the clutch did't disengage.
The petal feels normal, maybe a little soft.
Checked the fluid - all is ok
I removed the slave cylinder - no leaks were found. When I push in the clutch, with the slave cylinder out, the petal is extremely soft. On thing that I am not sure about is the travel of the slave cylinder. It moves an inch, or maybe a little more. Does anyone know how much travel the slave cylinder is supposed to have?
I was thinking that maybe the clutch master cylinder is bad and not moving enough fluid. Any opinions on that?
I am open to any one's suggestions about what the problem may be or what to do to fix it.
I hope that the clutch isn't bad it was replaced a year ago with a SB con-O
__________________
97 2500 SLT CC LB 4x4 5-Sp 4:10 LSD - Chipped (Lays BBQ under the seat),
25 Year Old Female Navigation Unit
I think i got ripped off, it smokes alot and makes a loud whistling noise.
|
|
|
|